Make your own free website on

Strong Computers

Arctic Silver Ceramique-2 Premium High-Density Thermal Compound 2.7 Gram Syringe

CPU Coolers, Heatsink, & Fans
Thermal Compound
Contact Information
Terms & Conditions

Enter subhead content here


Arctic Silver
Arctic Ceramique-2
2.7 Gram Tube
 Thermal Compound
Céramique™ 2
Tri-Linear Ceramic Thermal Compound

The high-density, ceramic-based thermal compound specifically designed
 for modern high-power CPUs and high-performance heatsinks or water-cooling solutions.


Tri-Linear Ceramic Content:
Like the original Céramique, Céramique 2 uses only ceramic fillers
 so it is neither electrically conductive nor capacitive.
 The tri-linear composite of aluminum oxide,
 zinc oxide and boron nitride allows the thinnest possible bond line
 with modern processors, heatsinks and electronics.
 Critically-sized particles and new ultra-high shear mixing techniques
 maximize Céramique 2's thermal performance and help maintain
 a stable homogenous suspension.
This exclusive combination provides performance exceeding most metal based compounds.

Polysynthetic Suspension Fluid:
A new oil mixture, improved thermal filler properties
 and increased particle deagglomeration, dispersal and density
 enhance Céramique 2's thermal performance and overall stability.
The third generation polysynthetic suspension fluid
combines advanced synthetic oils to maximize wetting and stability
 while allowing a higher density of thermally conductive fillers.

Excellent Stability:
Céramique 2 is engineered to not separate, run, migrate, or bleed.

Electrical Insulator:
Céramique 2 does not contain any metal or other electrically conductive materials.
 It is a pure electrical insulator, neither electrically conductive nor capacitive.

2 to 10 degrees centigrade lower CPU full load core temperatures
 than standard thermal compounds or thermal pads
 when measured with a calibrated thermal diode imbedded in the CPU core.

Innovative Dispenser:
The amount of compound remaining in the 2.7-gram syringe
 is easy to determine as the rear of the plunger is perfectly flush
 with the flange when the syringe is empty.

Easy Clean Up:
Céramique 2 can easily be cleaned from CPUs and heatsinks with ArctiClean,
isopropyl alcohol or any of the cleaners listed in the product instructions.

Compliancy:RoHS Compliant.


Average Particle Size:
<0.36 microns <0.000014 inch (70 particles lined up in a row equal 1/1000th of an inch.)

Temperature Limits:
Peak: –150°C to >185°C Long-Term: –150°C to 130°C

Coverage Area:
2.7-gram syringe. (Approximately 1cc)
At a layer 0.003" thick, one syringe will cover about 22 square inches.

25-gram syringe. (Approximately 9.2cc)
At a layer 0.003" thick, one syringe will cover about 200 square inches.


Important Reminder:
Due to the unique shapes and sizes of the particles in Céramique 2,
it will take a minimum of 25 hours and several thermal cycles
 to achieve maximum particle to particle thermal conduction
 and for the heatsink to CPU interface to reach maximum conductivity.
 (This period will be longer in a system without a fan on the heatsink.)
 On systems measuring actual internal core temperatures
 via the CPU's internal diode, the measured temperature
will often drop slightly over this "break-in" period.
This break-in will occur during the normal use of the computer
 as long as the computer is turned off from time to time
 and the interface is allowed to cool to room temperature.
Once the break-in is complete, the computer can be left on if desired

Enter supporting content here

Strong-Computers * 1670 Wash. Blvd. * Ogden * Ut * 84404 * Tel. 801-695-3632